1/2-28 tap drill size
15/32"
- Inches
- 0.4688
- Millimetres
- 11.91
- Thread
- 67%
Drill a 15/32" hole before cutting a 1/2-28 thread. That is the standard tap drill for about 75% thread.
1/2-28 thread and hole sizes
| Thread | 1/2 diameter, 28 threads per inch, extra fine (UNEF) |
|---|---|
| Major diameter | 0.5000 in 12.70 mm |
| Pitch | 0.0357 in 0.907 mm |
| Tap drill, about 75% thread | 15/32" 0.4688 in |
| Tap drill, about 50% thread | 15/32" 0.4688 in, for stainless and other hard materials |
| Clearance hole, close fit | 33/64" 0.5156 in |
| Clearance hole, free fit | 17/32" 0.5312 in |
| Nearest metric bit | 11.9 mm |
Why 15/32"
A tap cuts threads into the wall of a hole, so the hole has to be smaller than the screw. For a 1/2-28 thread the hole that leaves exactly 75% thread is 0.4652 in. The closest standard bit is 15/32" at 0.4688 in, which leaves 67%.
More thread than that adds almost no strength and makes the tap much easier to break. In hard or tough material, go one step larger.
Tools for this job
- 1/2-28 tap
- 15/32" drill bit
- Tap and drill set
- Drill bit size gauge
- Thread pitch gauge
- Cutting oil for tapping
As an Amazon Associate we earn from qualifying purchases. Details