1-3/8-12 tap drill size
1-19/64"
- Inches
- 1.2969
- Millimetres
- 32.94
- Thread
- 72%
Drill a 1-19/64" hole before cutting a 1-3/8-12 thread. That is the standard tap drill for about 75% thread.
1-3/8-12 thread and hole sizes
| Thread | 1-3/8 diameter, 12 threads per inch, fine (UNF) |
|---|---|
| Major diameter | 1.3750 in 34.92 mm |
| Pitch | 0.0833 in 2.117 mm |
| Tap drill, about 75% thread | 1-19/64" 1.2969 in |
| Nearest metric bit | 32.9 mm |
Why 1-19/64"
A tap cuts threads into the wall of a hole, so the hole has to be smaller than the screw. For a 1-3/8-12 thread the hole that leaves exactly 75% thread is 1.2938 in. The closest standard bit is 1-19/64" at 1.2969 in, which leaves 72%.
More thread than that adds almost no strength and makes the tap much easier to break. In hard or tough material, go one step larger.
Tools for this job
- 1-3/8-12 tap
- 1-19/64" drill bit
- Tap and drill set
- Drill bit size gauge
- Thread pitch gauge
- Cutting oil for tapping
As an Amazon Associate we earn from qualifying purchases. Details